|
The
United States Mint had
ceased striking silver
dollars in 1804. Although
the denomination was the
"flagship"
monetary unit in U.S.
coinage, demand for it
came mostly from bullion
depositors, and few dollar
coins circulated in the
beginning of the 19th
century. Much of each
year's mintage was either
melted domestically or
exported. By the 1820s and
`30s however, two
successive Mint directors,
Samuel Moore and Robert M.
Patterson, had advocated
reviving dollar coinage.
Although Moore obtained
authorization to do so in
1831, it was not until
Patterson replaced him in
1835 that preparations
finally got under way.
Not
since the 1792 half dimes
were struck had so many
Mint and other government
officials taken such a
keen interest in the
production of a new coin.
Mint Director Patterson,
ambitious to make an
artistic statement, hired
artist Thomas Sully to
make sketches of a full
figure of Liberty along
the lines of the
allegorical figure
Britannia seen on English
coins. Patterson retained
noted painter Titian Peale
to fashion the eagle for
the reverse and instructed
newly hired Second
Engraver Christian
Gobrecht to translate the
designs to metal.
Gobrecht's design was a
composite of both Peale's
and Sully's works, as well
as his own ideas. It was a
masterful work and
received immediate
acclaim. President Jackson
and his Cabinet reviewed
Gobrecht's sketches on
October 17, 1835 and were
favorably impressed.
The
final design featured the
figure of Liberty seated
on a rock, draped in a
loose-fitting gown
suggesting statuary from
Hellenistic Greece. She is
looking over her right
shoulder, her right arm
supporting the Union
shield. Her left arm holds
a long pole with a Liberty
cap on top. The entire
central device stands
alone on the obverse with
no stars or lettered
devices, only the date
below, giving the coin a
medallic quality, with
Liberty a solitary, cameo
figure. A naturalistic
eagle in flight adorns the
reverse, the bird rising
"onward and
upward" as Patterson
ordered, a position
intended to symbolize the
unbounded optimism that
Americans had for the
nation's future. The eagle
flies amid a field of 26
large and small stars,
representing the thirteen
original states and the
thirteen admitted to the
Union since 1789
(anticipating Michigan's
entry).
By
November 1836, all was
ready for trial strikings
in silver. A small number
(presumably 18 pieces) of
the new dollars were
distributed in
Philadelphia. Reaction was
almost universally
positive, with one
exception. Patterson had
ordered Gobrecht to place
his name on the new coin.
He did so by inscribing C.
GOBRECHT F. in small
letters in the field
beneath the figure of
Liberty the F. standing
for FECIT, Latin for
"He made it."
Gobrecht was criticized as
a "conceited
German" and vilified
in the local press.
Patterson solved the
problem by having Gobrecht
move his name to the base
of the figure of Liberty,
visible only if one looks
carefully at the coin. The
eighteen or so pieces
struck with his name below
the base are considered
patterns and are very
rare.
Regular
production of Gobrecht
dollars began sometime in
December of 1836. The
1,000 regular issue
dollars of 1836 were
struck at the old 1792
standard fineness of
.8924. The same date was
used for the 600 coins
minted in March, 1837, but
these pieces were produced
from planchets .900 fine
as authorized by the Mint
Act of 1837. So close in
weight, the two issues are
easily differentiated by
alignment: the 1837
dollars have a medallic
alignment the obverse and
reverse are aligned on a
vertical axis, while the
1836 coins have a
horizontal, or coin,
alignment. All original
dollars dated 1836 will
show the eagle flying
"onward and
upward," while the
restrikes made in the
1850s and `60s will have
the eagle flying
horizontally. The
approximately 25 coins
made in 1838 are
considered to be patterns,
with thirteen stars around
the periphery of the
obverse replacing the
stars on the reverse
fields. Only 300 dollars
were struck in 1839 with
Gobrecht's design, and all
were intended for
circulation. These coins,
like the 1838 patterns,
have reeded edges.
Throughout
the 19th century Gobrecht
dollars were very popular
with collectors. In the
late 1850s, demand far
exceeded the available
supply. Mint Director
James Ross Snowden,
desirous of expanding the
Mint's collection of coins
during his tenure, decided
to take advantage of this
situation. Funds were not
available for outright
purchase of coins, so
Snowden used Mint dies to
create numismatic
curiosities such as the
Class II and Class III
1804 dollars,
"transitional"
half dimes and dimes, and
Gobrecht dollar restrikes.
He would then trade these
restrikes and fantasy
coins to local collectors
for rare coins lacking in
the Mint collection. These
restrikes were made from
1858 through the summer of
1860 and again in 1867-68.
Actual numbers made are
unknown, but it is
estimated that the total
number of restrikes may
exceed the original
mintage.
All
Gobrecht dollars were
struck in the Philadelphia
Mint and all have a proof
finish, even the regular
circulation issues of 1836
and 1837. This is a unique
phenomenon in U.S.
numismaticsthe only series
of coins intended for
circulation struck as
proofs. Counterfeits are
virtually unknown, perhaps
because of the proof
surface, which is very
difficult to duplicate.
The design first begins to
show friction on Liberty's
knees and breasts, and on
the highpoint of the
eagle's breast on the
reverse.
With
the status of a regular
issue coin, Gobrecht
dollars are actively
pursued by type
collectors. The most
commonly encountered issue
is the plain edge
1836-dated restrike with
name on base and starry
reverse. These restrikes
comprise more than
two-thirds of the Gobrecht
dollars offered at auction
in recent years, and they
exist in a wide range of
grades from heavily
circulated to gem
condition. Date collectors
occasionally attempt
completion of a
three-piece set of coins
with the dates 1836, 1838,
and 1839, but very few
collectors undertake the
challenge of a complete
set of Gobrechts. Such a
set would be virtually
impossible to assemble
because of the several
obverse/reverse mulings
made by Mint Director
Snowden in the late 1850s.
Beginning
in 1837, Gobrecht's Seated
Liberty design was adopted
on all U.S. silver coins
from half dime through
dollar. The reverse with
its naturalistic eagle was
dropped for the quarter,
half dollar, and dollar
denominations in favor of
a revision of John Reich's
heraldic eagle of 1807.
The obverse designonly
slightly modified from
Gobrecht's original
conceptwas used on the
dollar until 1873.
SPECIFICATIONS:
Diameter:
39 millimeters
Weight: 1836 Original:
26.96 grams, Others: 26.73
grams
Composition:1836 Orig.:
.8924 silver, .1076
copper, Others: .900
silver, .100 copper
Edge: 1836: Plain,
1838-39: Reeded
Net Weight: 1836 Orig.:
.77351 ounce pure silver,
Others: .77344 ounce pure
silver
|